View source for S0005 Pasta-annostelija

[[Luokka:Laitteet]]
[[Luokka:Elektroniikkahuone]]
=== Pintaliitostyöpisteen Pasta-annostelija ===

{|
|- style="width: 100%;"
||
{| class="wikitable sortable"
|-
! Tieto
! Teksti
|-
| Hacklab ID || S0005
|-
| Nimitys || Pasta-annostelija
|-
| Laiteteksti || 983A
|-
| Tunnusnumero || N/A
|-
| Hankinta-aika || 2022
|-
| Erityistietoja || 
|-
| Kommentti || 
|-
| Omistaja || Hacklab
|-
| Yhteyshenkilö || Tilavastaava
|}

{|
|- style="width: 100%;"
||
{| class="wikitable sortable"
|-
! Tieto
! Teksti
|-
| Brand Name || YDL (YI.DE.LONG) ????
|-
| Power Input || 220V
|-
| Power Consumption || N/A
|-
| Internal Voltage || 12V DC / 24V DC
|-
| Input Air Pressure || 10-100 psi
|-
| Output Air Pressure || 1-80 psi
|-
| Dispensing Time || 0.01s - 99.99s
|-
| Dispensing Time Interval || 0.1s - 9.9s
|-
| Station Dimensions || 235(w) x 63(h) x 225(d) mm
|-
| Weight || 2.2 kg
|}

[[Tiedosto:S0005-E.jpg]]

1. Power Switch: putdown light on shows "On", light off shows "Off"

2. Dispensing time display: Display setting time

3. Input air pressure pressure governor: First pull out, Reversal is lower pressure, veering is the higher pressure

4. Barometer: display range: 0-100 psi

5. Vacuum control unit: Reversal is Vacuum pumpback high, veering is the Vacuum pumpback low

6. Testing button: During testing, it can replace the foot switch

7. Dispensing time dial code button: Display setting time, adopts add and subtract way 00.01s-99.99s

8. time interval setting dial code button: Display setting time, adopts add and subtract way 0.1s-9.9s

9. Dispensing output interface: Connect to dispensing needle cylinder.

10. Air pressure input interface: Connect to clean high pressure source

11. Dispensing modes: 16 modes

12. The foot controller interface: Connect to foot switch

13. Power input socket

14. Fuse holder

The SET TIME control selects the duration of a single dispensing shot.

The INTERVAL control selects the time delay between shots.

Backside dip-switch mode settings:

[[Tiedosto:S0005-F.png]]

*F1: Hold switch to dispense continuously (not in shots). Release switch to stop.
*F2: Tap switch to begin dispensing shots. Tap switch again to stop.
*F3: Hold switch to dispense shots continuously. Release switch to stop.
*F4: Dispense shots continuously whenever powered on.
*F5: Tap switch to dispense 1 shot.
*F6-16: Tap switch to dispense 2-12 shots.

[[Tiedosto:S0005-A.png]]

[[Tiedosto:S0005-B.png]]

[[Tiedosto:S0005-C.png]]

[[Tiedosto:S0005-D.png]]