Ero sivun ”Puu-CNC” versioiden välillä
(→Wood CNC) |
(→First meeting to discuss the project 2018-06-27) |
||
| Rivi 4: | Rivi 4: | ||
=== First meeting to discuss the project 2018-06-27 === | === First meeting to discuss the project 2018-06-27 === | ||
* The rails and sliders (Star 1622-894-11) we have can be found in the [http://www.prema.com.pl/assets/Katalogi/Technikaliniowa/STAR_PATINES_Bosh_rexroth.pdf Star Rexroth catalogue] | * The rails and sliders (Star 1622-894-11) we have can be found in the [http://www.prema.com.pl/assets/Katalogi/Technikaliniowa/STAR_PATINES_Bosh_rexroth.pdf Star Rexroth catalogue] | ||
| + | * We have three CAN-controlled motor controllers of the same type and one separate of a different type (manufacturer, type, version?) | ||
| + | * Kremmen had an idea for a Z axis set (link?) | ||
Versio 28. kesäkuuta 2018 kello 07.56
Wood CNC
- Plan is to make a CNC-controlled wood lathe with an approximately 1 m × 1 m work area
First meeting to discuss the project 2018-06-27
- The rails and sliders (Star 1622-894-11) we have can be found in the Star Rexroth catalogue
- We have three CAN-controlled motor controllers of the same type and one separate of a different type (manufacturer, type, version?)
- Kremmen had an idea for a Z axis set (link?)
