Ero sivun ”G04 Engl” versioiden välillä
Siirry navigaatioon
Siirry hakuun
| Rivi 5: | Rivi 5: | ||
'''G04 {P}''' <br /> | '''G04 {P}''' <br /> | ||
| − | '''P''': pause | + | '''P''': pause delay in milliseconds <br /> |
Program execution stops for the duration of the break and then resumes normally without a different command. The pause does not stop the spindle or interrupt the supply of cutting fluid if they are on. If the argument P is not given, its previous value is valid. | Program execution stops for the duration of the break and then resumes normally without a different command. The pause does not stop the spindle or interrupt the supply of cutting fluid if they are on. If the argument P is not given, its previous value is valid. | ||
Nykyinen versio 12. helmikuuta 2021 kello 21.01
G04: pause for a fixed period.
Syntax
G04 {P}
P: pause delay in milliseconds
Program execution stops for the duration of the break and then resumes normally without a different command. The pause does not stop the spindle or interrupt the supply of cutting fluid if they are on. If the argument P is not given, its previous value is valid.
| ---- | - | |||||