Ero sivun ”Puu-CNC” versioiden välillä
Siirry navigaatioon
Siirry hakuun
(Initial version) |
|||
| (9 välissä olevaa versiota samalta käyttäjältä ei näytetä) | |||
| Rivi 1: | Rivi 1: | ||
| − | == | + | == Wood CNC == |
| − | + | * Plan is to make a CNC-controlled wood milling machine with an approximately 1 m × 1 m work area | |
| + | * Depili has made [https://a360.co/2K3v5lE an initial mockup model] | ||
| − | + | === First meeting to discuss the project 2018-06-27 === | |
| − | + | * The rails and runners (Star 1622-894-11: slimline steel runner block 1622 accuracy class N with low friction seals, size 20 rail) we have can be found in the [http://www.prema.com.pl/assets/Katalogi/Technikaliniowa/STAR_PATINES_Bosh_rexroth.pdf Star Rexroth catalogue] (pp. 34, 56) | |
| + | * This catalogue also includes ready-made bellows for this rail system | ||
| + | * Kremmen suggested [https://www.aliexpress.com/item/a-water-cooled-spindle-motor-2-2kw-with-a-VFD-as-a-set/825023707.html this 2.2 kW water-cooled spindle package] | ||
| + | * We have three CAN-controlled motor controllers of the same type and one separate of a different type (manufacturer, type, version?) | ||
| + | * Also have from another CNC project a box with a parallel port interface to motors | ||
Nykyinen versio 28. kesäkuuta 2018 kello 10.12
Wood CNC
- Plan is to make a CNC-controlled wood milling machine with an approximately 1 m × 1 m work area
- Depili has made an initial mockup model
First meeting to discuss the project 2018-06-27
- The rails and runners (Star 1622-894-11: slimline steel runner block 1622 accuracy class N with low friction seals, size 20 rail) we have can be found in the Star Rexroth catalogue (pp. 34, 56)
- This catalogue also includes ready-made bellows for this rail system
- Kremmen suggested this 2.2 kW water-cooled spindle package
- We have three CAN-controlled motor controllers of the same type and one separate of a different type (manufacturer, type, version?)
- Also have from another CNC project a box with a parallel port interface to motors