Helsinki Hacklabin wikistä
Siirry navigaatioon
Siirry hakuun
|
|
| Rivi 29: |
Rivi 29: |
| | Yhteyshenkilö || Tilavastaava | | | Yhteyshenkilö || Tilavastaava |
| |} | | |} |
| 1. Dispensing type: Free to set 16 kinds of ways, with dispensing time
| |
| display*
| |
| 2. Automatic Timing dispensing: 00.01S-99.99S
| |
| 3. Manual timing dispensing: Can dispensing coating, lineation continuously
| |
| 4. Minium dispensing: 0.0001 ml
| |
| 5. Dispensing time interval: 0.1-9.9S(automatic timing function)
| |
|
| |
|
| {| | | {| |
Versio 8. joulukuuta 2022 kello 10.41
Pintaliitostyöpisteen Pasta-annostelija
| Tieto
|
Teksti
|
| Hacklab ID |
S0005
|
| Nimitys |
Pasta-annostelija
|
| Laiteteksti |
983A
|
| Tunnusnumero |
N/A
|
| Hankinta-aika |
2022
|
| Erityistietoja |
|
| Kommentti |
|
| Omistaja |
Hacklab
|
| Yhteyshenkilö |
Tilavastaava
|
| Tieto
|
Teksti
|
| Brand Name |
YDL (YI.DE.LONG) ????
|
| Power Input |
220V
|
| Power Consumption |
N/A
|
| Internal Voltage |
12V DC / 24V DC
|
| Input Air Pressure |
10-100 psi
|
| Output Air Pressure |
1-80 psi
|
| Dispensing Time |
0.01s - 99.99s
|
| Dispensing Time Interval |
0.1s - 9.9s
|
| Station Dimensions |
235(w) x 63(h) x 225(d) mm
|
| Weight |
2.2 kg
|
The SET TIME control selects the duration of a single dispensing shot.
The INTERVAL control selects the time delay between shots.
Backside dip-switch mode settings:
- F1: Hold switch to dispense continuously (not in shots). Release switch to stop.
- F2: Tap switch to begin dispensing shots. Tap switch again to stop.
- F3: Hold switch to dispense shots continuously. Release switch to stop.
- F4: Dispense shots continuously whenever powered on.
- F5: Tap switch to dispense 1 shot.
- F6-16: Tap switch to dispense 2-12 shots.
|
|
