Ero sivun ”Translations:Metallitilan Nakkilista/3/en” versioiden välillä

Kohteesta Helsinki Hacklabin wiki
Loikkaa: valikkoon, hakuun
Rivi 1: Rivi 1:
 
* ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
 
* ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
−
* ☐ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
+
* ☑ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
 
** 19/05/2023: Half of the parts have been moved into the cabinets next to the lathe. The remaining half needs sorting.
 
** 19/05/2023: Half of the parts have been moved into the cabinets next to the lathe. The remaining half needs sorting.
 +
** The corner is mostly empty. Everything that is there is on wheel and can be moved.
 
* ☐ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
 
* ☐ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
−
* ☐ Buy the drill. Possibly [https://www.clasohlson.com/fi/Bosch-PBD-40-Pylv%C3%A4sporakone%2C-kaksi-vaihdetta/p/Pr408340000 Bosch PBD 40].
+
** The table can be a cart on wheels as well. This can be welded together from the materials we have.
−
* ☐ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
+
** The cart is being built.
 +
* ☑ Buy the drill. Possibly [https://www.clasohlson.com/fi/Bosch-PBD-40-Pylv%C3%A4sporakone%2C-kaksi-vaihdetta/p/Pr408340000 Bosch PBD 40].
 +
* ☑ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
 
* ☐ Attach the drill to the table.
 
* ☐ Attach the drill to the table.
 
* ☐ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.
 
* ☐ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.

Versio 18. elokuuta 2023 kello 06.15

Viestin määritelmä (Metallitilan Nakkilista)
* ☑ Sijainnin valinta. Alustavasti puutyötilan ja metallitilan välissä olevan oven vieressä olevaan kulmaan
* ☑ Sijainti tyhjennetty tavarasta. Tällä hetkellä kulmassa on sorvin osia. Osat pitää siirtää sorvin läheisyyteen ja lajitella laatikostoihin.
** 19/05/2023: Puolet osista siirretty sorvin vieressä olevaan laatikkoon. Toinen puoli odottaa siivoamista.
** Kulma on pääosin tyhjennetty. Kaikki, mitä siellä on, on pyörillä, joten ne saa pois tieltä.
* ☑ Pöydän hankinta. Syvyys max. 70cm, leveys noin 200cm. (TODO: leveys pitää mitata tarkemmiin)
** Pöytä voi olla myös renkailla oleva kärry. Tämän voi hitsata kasaan varastossa olevasta materiaalista.
** Kärryä rakennetaan tällä hetkellä (18/08/2023)
* ☑ Poran hankinta. Mahdollisesti [https://www.clasohlson.com/fi/Bosch-PBD-40-Pylv%C3%A4sporakone%2C-kaksi-vaihdetta/p/Pr408340000 Bosch PBD 40].
* ☑ Poranterien hankina. Poralle oma setti poranteriä, mitkä kiinnitetään porakoneeseen.
* ☑ Poran kiinnitys pöytään.
* ☑ Poranterätelineen teko porakonetta varten. Kiinnitetään kiinteästi porakoneeseen. Tämän ideana on että näin vältetään niiden käyttö muissa tiloissa, jolloin saadaan seurattua, kuinka kauan ne kestävät.
* ☐ Laatikosto poran kärryn täytteeksi.
Käännös* ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
* ☑ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
** 19/05/2023: Half of the parts have been moved into the cabinets next to the lathe. The remaining half needs sorting.
** The corner is mostly empty. Everything that is there is on wheel and can be moved.
* ☐ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
** The table can be a cart on wheels as well. This can be welded together from the materials we have.
** The cart is being built.
* ☑ Buy the drill. Possibly [https://www.clasohlson.com/fi/Bosch-PBD-40-Pylv%C3%A4sporakone%2C-kaksi-vaihdetta/p/Pr408340000 Bosch PBD 40].
* ☑ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
* ☐ Attach the drill to the table.
* ☐ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.
  • ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
  • ☑ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
    • 19/05/2023: Half of the parts have been moved into the cabinets next to the lathe. The remaining half needs sorting.
    • The corner is mostly empty. Everything that is there is on wheel and can be moved.
  • ☐ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
    • The table can be a cart on wheels as well. This can be welded together from the materials we have.
    • The cart is being built.
  • ☑ Buy the drill. Possibly Bosch PBD 40.
  • ☑ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
  • ☐ Attach the drill to the table.
  • ☐ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.
Noudettu kohteesta https://wiki.helsinki.hacklab.fi/mediawiki/index.php?title=Translations:Metallitilan_Nakkilista/3/en&oldid=80942