TODO

Kohteesta Helsinki Hacklabin wiki
Versio hetkellä 12. huhtikuuta 2021 kello 23.09 – tehnyt Haarald (keskustelu | muokkaukset) (SUUNNITELMAT)
Loikkaa: valikkoon, hakuun


Left column Finnish!

Right column English

Keskeneräinen

Tälle sivulle on kerätty listaa keskeneräisistä läbin koneisiin tai rakenteisiin liittyvistä projekteista.

  • Yleinen siivoaminen, lattioita saa imuroida ja luututa sekä pöydillä olevaa ryönää kerätä tuomiolaatikoihin
  • Kantti-leikkuri-mankeli-yhdistelmäkone: leikkuriosan ihmettely ja korjaus
  • Hiili, pieni keltainen cnc-jyrsin; sähköjärjestelmän kiinnitys laatikkoon, johdotus yms; lisätietoja chadez @slack
  • Pieni metallisorvi: suojapussi/koppa pitämään pöly poissa sorvista kun sitä ei käytetä
  • Keramiikkauuni: termostaattiboksin kiinnitys runkoon, käyttöohjeiden kirjoittaminen; lisätietoa rambo @slack
  • Jääkaapin kätisyyden vaihto, vaati keskimmäisen saranan mallinnuksen ja koneistuksen peilikuvana

Incomplete

A list of incomplete projects involving the machines or structures of the lab.

  • General cleaning, floors can be vacuumed and boned, and rags on the tables can be collected in judgment boxes
  • Square-cutter-almond-combination machine: wonder and repair of the cutter part
  • Hiili(Coal), small yellow cnc cutter; electrical system box mounting, wiring, etc .; learn more at chadez @slack
  • Small metal lathe: protective bag / hood to keep dust out of the lathe when not in use
  • Ceramic oven: attaching the thermostat box to the frame, writing operating instructions; more information Rambo @slack
  • Replacement of the hand of the door of fridge, required modeling and machining of the middle hinge as a mirror image

EI KIIRETTÄ

  • Infosivut, näyttävät slideja ja sivuja vierailijoille. Tarvitsee apua sarjaporttiviestinnässä + Ras-Pi. Lisätietoja: jssmk

VALMIINA ALOITTAMAAN

  • Maalaa lattia uudelleen. Saattaa tarvita apua vanhan maalin poistamisessa ensin. Tavaroiden siirtäminen eri paikoissa. Alustavat suunnitelmat vain toistaiseksi.

Not in a big hurry

  • Infoscreens, displays that show slides and pages of information for visitors. Needs help with serial port communication + Ras-Pi. For more info, ask: jssmk

Be prepared

  • Re-painting the floor. Might require help in removing old paint first. Moving stuff in different locations. Preliminary plans made only so far.

VALMIS

A list of completed projects involving the machines or structures of the lab.

  • Sahapukkeja puutyötilaan, Wandelin mallin mukaisesti vähintään kaksi sirkkelin pöydän korkeudella olevaa ja kaksi katkaisusahan korkeudella olevaa
  • Tulostustilan sähköt
  • Reitittimien ja muun laitteiston siirto isosta räkistä pieneen seinällä olevaan mustaan räkkiin; lisätietoja hallitukselta
  • Puutyötila; lämminilmarööri puusepälle; lisätietoja hallitukselta
  • Ovipumppu tulityötilan oveen
  • Minifactory asenna raspiin cura, laita profiilit ja asetukset kuntoon, dokumentoi; lisätietoja rambo @slack
  • Ultimaker pura-puhdista-kasaa-kalibroi; lisätietoja thjt @slack
  • Puutyötilan hyllyn jumppa
    • Muovisen sulaketaulun kohdalle tarvitaan lisää tilaa isompaa rasiaa varten
    • Siirretään 80cm hyllyväli hyllyn vasemmasta reunasta sähkökeskusten oikealle puolelle
    • Siirretään loppua hyllyä keskuksilta vasemmalla 20cm oikealle
    • Kasataan uusi 100cm hyllyväli hyllyn vasempaan päähän
  • parempi ratkaisu pahvinkeräykseen
  • Uusien jäte-astioiden merkintä ja ohjeiden kirjoittaminen
  • Sähkömiehille
    • Puutilan ilmanpuhdistin; nopeudensäädin pois ja tilalle koneen yhteydessä oleva kytkimellinen johto
    • "Uuden" pylväsporakoneen käyttökytkimen vaihto

DONE

A list of completed 'projects involving the machines or structures of the lab.

  • Saw logs for woodworking, according to Wandel model at least two at the height of the circular saw table and two at the height of the cutting saw
  • Print mode electricity
  • Transfer routers and other hardware from a large rack to a small black rack on the wall; more information from the government
  • Wood workspace; warm air knife for carpenter; more information from the government
  • Door pump for fire workspace door
  • Minifactory install rasp Cura, put profiles and settings in order, document; more information Rambo @slack
  • Ultimaker unpack-clean-pile-calibrate; more info thjt @slack
  • Wood workspace shelf gym
    • More space is required for the plastic fuse board for a larger box
    • Move the 80cm shelf spacing from the left edge of the shelf to the right side of the electrical panels
    • Move the end of the shelf from the centers on the left 20cm to the right
    • Assemble a new 100cm shelf spacing at the left end of the shelf
  • a better solution for cardboard collection
  • Labeling new waste containers and writing instructions
  • For electricians
    • Wood room air purifier; the cruise control off and replaced with the clutch cable connected to the machine
    • Replacement of the "new" column drill operating switch


SUUNNITELMAT

Remontti, loppuvuosi 2017 Tämän pohjalta lähdetään:

  • kuvan ehdotuksesta poiketen, ovi kemiahuoneeseen olisi 3d-tulostinten suunnasta?
  • Varmaa: seinä kompressorihuoneen suuntaan, siinä missä katto alkaa matalana.
  • Varmaa: vessa aiempaa pienikokoisempana
  • Neuvottelussa todettua: huoneen suunta muutetaan kapeaksi, kemiakaappi siirtyy ikkunan viereen
  • Jonkin verran epävarmaa: ovien sijoittelu
  • Jätetään myöhemmäksi: vanhat huonetta ympäröivät seinät, mitä niille tehdään

PLANS

'Renovation, rest of 2017' Based on this, we start:

  • Contrary to the picture suggestion, would the door to the chemistry room be from the direction of the 3D printers?
  • Sure: a wall in the direction of the compressor room, where the ceiling starts low.
  • Sure: the toilet is smaller than before
  • According to the meeting: the direction of the room is changed to a narrow one, the chemistry cabinet moves next to the window
  • Somewhat uncertain: the placement of the doors
  • Leave later: the old rooms are surrounded by walls, what is done to them

Uusi vessa 20171119.png