Ero sivun ”POM-stash” versioiden välillä

Kohteesta Helsinki Hacklabin wiki
Loikkaa: valikkoon, hakuun
(Ak: Uusi sivu: == POM-Stash == ***WORK IN PROGRESS. NOT YET IN USE BUT TALK TO TJL ON SLACK IF YOU NEED YOUR FIX*** There is a pay-as-you-go stash of POM-C at the lab. Final location TBD. == ...)
 
(POM-Stash)
 
(8 välissä olevaa versiota samalta käyttäjältä ei näytetä)
Rivi 1: Rivi 1:
 
== POM-Stash ==
 
== POM-Stash ==
  
***WORK IN PROGRESS. NOT YET IN USE BUT TALK TO TJL ON SLACK IF YOU NEED YOUR FIX***
+
This is not a Hacklab official thing, this is a separate, private setup offered by Tjl. Any comments are welcome on slack or in person.
 +
 
 +
'''WORK IN PROGRESS. CONSIDER THIS A "BETA" SERVICE'''
  
 
There is a pay-as-you-go stash of POM-C at the lab.
 
There is a pay-as-you-go stash of POM-C at the lab.
  
Final location TBD.
+
POM-C is one of the mechanically best materials to use with the laser cutter at the lab. It is similar to delrin.
 +
 
 +
Final location TBD. As of 2019-01-18 the sheets are leaning on the wall next to the electronics room but hopefully they will find a better location ASAP. The plan is to build a sheet material rack for the laser room
  
 
== Current inventory ==
 
== Current inventory ==
 +
 +
You can find the current (not updated live!) inventory and prices at the spreadsheet
  
 
https://docs.google.com/spreadsheets/d/1mRaH4ZC1FsSRiC2JuGChmDn-CpI5cFmjFaLQRhudz-4/edit?usp=sharing
 
https://docs.google.com/spreadsheets/d/1mRaH4ZC1FsSRiC2JuGChmDn-CpI5cFmjFaLQRhudz-4/edit?usp=sharing
Rivi 20: Rivi 26:
  
 
3. Use the form to report your usage
 
3. Use the form to report your usage
 +
https://docs.google.com/forms/d/e/1FAIpQLScrr4w0Cu22V43BUmgu0zslpP6bAlFp11coZ2EJREG9wHoD_A/viewform?usp=sf_link
 +
  
4. Pay to Tjl (instructions to follow later)
+
4. Pay to Tjl (either in person or ask for the bank account number as a private message on Slack. This will probably be optimized later)

Nykyinen versio 24. tammikuuta 2019 kello 07.40

POM-Stash

This is not a Hacklab official thing, this is a separate, private setup offered by Tjl. Any comments are welcome on slack or in person.

WORK IN PROGRESS. CONSIDER THIS A "BETA" SERVICE

There is a pay-as-you-go stash of POM-C at the lab.

POM-C is one of the mechanically best materials to use with the laser cutter at the lab. It is similar to delrin.

Final location TBD. As of 2019-01-18 the sheets are leaning on the wall next to the electronics room but hopefully they will find a better location ASAP. The plan is to build a sheet material rack for the laser room

Current inventory

You can find the current (not updated live!) inventory and prices at the spreadsheet

https://docs.google.com/spreadsheets/d/1mRaH4ZC1FsSRiC2JuGChmDn-CpI5cFmjFaLQRhudz-4/edit?usp=sharing

(note: there is some tolerance in the thicknesses, measure before using if your design is sensitive to thickness)

Procedure

1. Cut your part (either use laser cutter directly or cut with the circular saw or bandsaw)

2. Calculate your area. Use the largest rectangle that contains all your markings. If that would leave less than 5cm of material in some direction, you must pay for that material as well.

3. Use the form to report your usage https://docs.google.com/forms/d/e/1FAIpQLScrr4w0Cu22V43BUmgu0zslpP6bAlFp11coZ2EJREG9wHoD_A/viewform?usp=sf_link


4. Pay to Tjl (either in person or ask for the bank account number as a private message on Slack. This will probably be optimized later)