Ero sivun ”Metallitilan Nakkilista/en” versioiden välillä

Helsinki Hacklabin wikistä
Siirry navigaatioon Siirry hakuun
(Ak: Uusi sivu: * ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms. * ☐ Empty the chosen location. Currently contains pa...)
 
 
(14 välissä olevaa versiota 2 käyttäjän tekeminä ei näytetä)
Rivi 1: Rivi 1:
 
<languages/>
 
<languages/>
  
−
== Metallihuoneen avoimena olevat tehtävät ==
+
== Open Tasks ==
  
  
−
=== Porakone ===
+
=== Drill Press ===
  
 
* ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
 
* ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
−
* ☐ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
+
* ☑ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
−
* ☐ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
+
** 19/05/2023: Half of the parts have been moved into the cabinets next to the lathe. The remaining half needs sorting.
−
* ☐ Buy the drill. Possibly [https://www.clasohlson.com/fi/Bosch-PBD-40-Pylv%C3%A4sporakone%2C-kaksi-vaihdetta/p/Pr408340000 Bosch PBD 40].
+
** The corner is mostly empty. Everything that is there is on wheel and can be moved.
−
* ☐ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
+
* ☑ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
−
* ☐ Attach the drill to the table.
+
** The table can be a cart on wheels as well. This can be welded together from the materials we have.
−
* ☐ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.
+
** The cart is being built.
 +
* ☑ Buy the drill. Possibly [https://www.clasohlson.com/fi/Bosch-PBD-40-Pylv%C3%A4sporakone%2C-kaksi-vaihdetta/p/Pr408340000 Bosch PBD 40].
 +
* ☑ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
 +
* ☑ Attach the drill to the table.
 +
* ☑ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.
 +
* ☐ Add drawers to the drill cart.
  
 +
=== Sorting of the Material Storage ===
  
−
=== Materiaalivaraston lajittelu ===
+
* ☑ Move small pieces into separate boxes
 +
* ☐ Sort and arrange the pile of metal next to the garage door. Move the extra material into the shipping container.
 +
* ☐ Design a material rack.
 +
* ☐ Build the material rack.
 +
* ☐ Move materials into the material rack.
  
−
* ☑ Pienen silpun lajittelu laatikoihin
+
=== Clean or fix the sheet metal rack's wheels ===
−
* ☐ Nosto-oven vieressä olevan kasan lajittelu ja järjestäminen. Ylimääräisen materiaalin vienti konttiin.
 
−
* ☐ Materiaalihyllyn suunnittelu.
 
−
* ☐ Materiaalihyllyn rakentaminen.
 
−
* ☐ Materiaalin siirtäminen uuteen hyllyyn.
 
  
−
 
+
* ☑ Remove material from the rack
−
=== Lotan takana olevan tilan siistiminen ===
+
* ☑ Inspect the wheels and either clean or replace them
−
 
+
* ☑ Put the material back on the rack
−
* ☐ Sammuttimien tarkistus, lajittelu ja siirto muualle. Säilytys jossain muualla kuin metallitilassa esim. konttissa.
 
  
  

Nykyinen versio 16. tammikuuta 2024 kello 00.23

Muut kielet:

Open Tasks

Drill Press

  • ☑ Choose Location. Preliminary location is in the corner next to the door between the woodworking and metalworking rooms.
  • ☑ Empty the chosen location. Currently contains parts from the lathe. Move parts next to the lathe and arrange into the cabinets.
    • 19/05/2023: Half of the parts have been moved into the cabinets next to the lathe. The remaining half needs sorting.
    • The corner is mostly empty. Everything that is there is on wheel and can be moved.
  • ☑ Acquire a table. Depth max. 70cm, width about 200cm. (TODO: check the width)
    • The table can be a cart on wheels as well. This can be welded together from the materials we have.
    • The cart is being built.
  • ☑ Buy the drill. Possibly Bosch PBD 40.
  • ☑ Buy drill bits. The drill should have its own set of bits that are attached to the drill press.
  • ☑ Attach the drill to the table.
  • ☑ Make a drill bit holder for the drill bits. Attach it to the drill press. The idea is that the drill bits are only used with the drill press which allows us to track how long they'll last.
  • ☐ Add drawers to the drill cart.

Sorting of the Material Storage

  • ☑ Move small pieces into separate boxes
  • ☐ Sort and arrange the pile of metal next to the garage door. Move the extra material into the shipping container.
  • ☐ Design a material rack.
  • ☐ Build the material rack.
  • ☐ Move materials into the material rack.

Clean or fix the sheet metal rack's wheels

  • ☑ Remove material from the rack
  • ☑ Inspect the wheels and either clean or replace them
  • ☑ Put the material back on the rack


Appendix

Checked and unchecked checkboxes for copy-pasting: ☑☐

Noudettu kohteesta ”https://wiki.helsinki.hacklab.fi/mediawiki/index.php?title=Metallitilan_Nakkilista/en&oldid=82173”