Mendel90
Versio hetkellä 28. heinäkuuta 2016 kello 17.49 – tehnyt TechnomadicJim (keskustelu | muokkaukset) (I will improve this. Sorry my wiki-foo is poor :/)
The Mendel 90 is the pink printer which is for printing ABS plastic. Here's the "Machine Settings" and Print Settings I use for Cura:
Cura PrintSettings
Cura Machine Settings
It's important you print with the hoitend at 240 degrees and bed at 110 degrees as you're printing ABS. Other settings can be tweaked as you see fit.
Printer can be found at http://mendel90.local Login / Password is hacklab / mendel90. Click "Connect" once logged in.
