Ero sivun ”Mendel90” versioiden välillä
(I will improve this. Sorry my wiki-foo is poor :/) |
(aded firmware settings) |
||
| Rivi 9: | Rivi 9: | ||
Printer can be found at http://mendel90.local Login / Password is hacklab / mendel90. Click "Connect" once logged in. | Printer can be found at http://mendel90.local Login / Password is hacklab / mendel90. Click "Connect" once logged in. | ||
| + | |||
| + | The Marlin Firmware can be found on my (TechnomadicJim) github: https://github.com/morrisonj/Marlin | ||
Versio 25. marraskuuta 2016 kello 12.10
The Mendel 90 is the pink printer which is for printing ABS plastic. Here's the "Machine Settings" and Print Settings I use for Cura:
Cura PrintSettings
Cura Machine Settings
It's important you print with the hoitend at 240 degrees and bed at 110 degrees as you're printing ABS. Other settings can be tweaked as you see fit.
Printer can be found at http://mendel90.local Login / Password is hacklab / mendel90. Click "Connect" once logged in.
The Marlin Firmware can be found on my (TechnomadicJim) github: https://github.com/morrisonj/Marlin
