Ero sivun ”Luokka:3D-tulostimet” versioiden välillä

Kohteesta Helsinki Hacklabin wiki
Loikkaa: valikkoon, hakuun
(remove mendel)
Rivi 1: Rivi 1:
Hacklab currently has two 3D-printers: [[Prusa]] in good working conditon and [[Minifactory]] as long term project, with dual extruder. [[Mendel90]] is  11/2019 waiting for new owner as 3D-printer shaped object, not working printer
+
Hacklab currently has two 3D-printers: [[Prusa]] in good working conditon and [[Minifactory]] as long term project, with dual extruder.  
  
 
[[Tiedosto:Printteripoyta.jpg|pienoiskuva|700px]]
 
[[Tiedosto:Printteripoyta.jpg|pienoiskuva|700px]]

Versio 19. joulukuuta 2019 kello 17.33

Hacklab currently has two 3D-printers: Prusa in good working conditon and Minifactory as long term project, with dual extruder.

Printteripoyta.jpg


Työnkulku yleisesti

  • Lue haluamasi printterin omat ohjeet alta.
  • Tee tai hanki STL-muotoinen malli.
  • Generoi G-koodi tietylle tulostimelle, filamentille sekä muille asetuksille. Tähän voi käyttää 3D-tulostus pc:tä tai omaa tietokonettasi jos sinulla on sopivat softat asennettuna.
  • Siirrä G-koodi tulostimen octoprintille.
  • Käynnistä tulostin ja tulostus laitekohtaisten ohjeiden mukaan
  • Valvo tulostusta koko sen keston ajan. Laitteita ei saa jättää päälle poistuessasi labilta.
  • Sammuta tulostin ohjeiden mukaan ja siivoa jälkesi.
  • Maksa käyttämäsi filamentti kassaan.

General Workflow

  • Read the instructions below for the printer you choose.
  • Make or get your model in STL-format.
  • Generate the G-gode for chosen printer, filament and other settings. You can use the 3D-printing pc or your own computer if you have the right software.
  • Move the G-code to octoprint.
  • Turn on the printer and start the print job according machine-specific instructions.
  • Keep an eye on printer while it's printing. Do not leave the lab while the printer is powered on.
  • Shut down the machine according to instructions, and clean the worktable.
  • Pay for the filament you have used in the box on the table.

Sivut, jotka ovat luokassa 3D-tulostimet

Seuraavat 11 sivua kuuluvat tähän luokkaan. Sivujen kokonaismäärä luokassa on 11.