Imas puruimuri

Kohteesta Helsinki Hacklabin wiki
Versio hetkellä 7. heinäkuuta 2020 kello 18.28 – tehnyt Sytem (keskustelu | muokkaukset) (päivitetty sijaintietoa kiintopisteiden muuttuessa)
Loikkaa: valikkoon, hakuun
Puruimuri

Suomalaisen näkökulmasta huumorikkaan Italialaisen Imas Aeromeccanica:n valmistama tehokas puruimuri kahdella purusäkillä.

Puruimuri sijaitsee puutyötilan takaosassa olevan oven takana, portaiden yläpäässä.

Turvallisuus / Safety

  • Vältä metallin ja isojen kappaleiden joutumista puruimuriin - Avoid vacuuming metal and big pieces
  • Käytä kuulosuojaimia - Use hearing protection

Ennen käyttöä / Before use

  1. Avaa tarvittavat sulkupellit - Open the needed blast gates
  2. Käynnistä imuri ohjauspainikkeesta - Start the dust collector using the button
    1. Jos imuri ei käynnisty, katso kohdasta viikkotarkistus - if the dust collector does not start, see "weekly checkup" below

Käytön jälkeen / After use

  • Sulje sulkupellit - Close the blast gates
  • Sammuta imuri painikkeesta - Shut down the dust collector using the button

Viikkotarkistus

Puruimuriin on rakennettu kuittausjärjestelmä, joka pakottaa kuittaamaan viikkotarkastuksen tehdyksi tehdyksi. Jos puruimuri ei käynnisty,

There is a service acknowledgment system built to the dust collector. It forces the weekly checkup to be acknowledged manually. If the dust collector does not start,

  1. Mene tilan takaosassa olevasta ovesta puruimurin luo - Go to the dust collector through the door on the back wall
  2. Tarkista ettei purusäkeissä ole reikiä - Check that the dust bags don't have holes in them
  3. Tarkista etteivät purusäkit ole täynnä - Check that the dust bags aren't full
  4. Heiluta kankaisia suodatinsäkkejä jotta niihin tarttunut puru irtoaa -- move around the fabric filter bags to ensure the dust stuck on them comes loose
  5. Kuittaa imuri käyttövalmiiksi ulko-oven viereisestä vihreästä painikkeesta - Acknowledge the maintenance as done by pressing the green button next to the exit door

Koneen tiedot / Machine information

  • Merkki / Make: Imas Aeromeccanica
  • Malli / Model:
  • Valmistusvuosi / Year of manufacture: ~1988
  • Imurin tulo / Inlet diameter: 250mm
  • Moottori / Motor:
    • Malli / Model: Kmer B 112 M 2
    • 3-vaihemoottori / 3 phase motor
    • Teho / Power: 4,0kW
    • Jännite / Voltage: 380 / 660V
    • Virta / Current: 8,45 / 4,9A
    • Tehokerroin / Power factor: 0.89
    • Kierrosluku / RPM: 2880

Tehdyt korjaustoimenpiteet

  • 2019-04 - Vaihdettu pistotulppa ja pyörimissuunta
  • 2019-04 - Lisätty nollavolttikytkin ja moottorinsuojarele