Ero sivun ”G20 Engl” versioiden välillä
(Ak: Uusi sivu: Category: G code G20: set units of measure in inches '''DO NOT USE!''' If the unit is set to inches, the machine will also interpret all offsets in the tables in inches. G21: ...) |
|||
| Rivi 1: | Rivi 1: | ||
[[Category: G code]] | [[Category: G code]] | ||
| − | G20: set units of measure in inches | + | =G20: set units of measure in inches= |
'''DO NOT USE!''' If the unit is set to inches, the machine will also interpret all offsets in the tables in inches. | '''DO NOT USE!''' If the unit is set to inches, the machine will also interpret all offsets in the tables in inches. | ||
| − | G21: set the units of measure to millimeters | + | =G21: set the units of measure to millimeters= |
At the beginning of each program, it is a good idea to execute command G21 for certainty. | At the beginning of each program, it is a good idea to execute command G21 for certainty. | ||
Nykyinen versio 12. helmikuuta 2021 kello 19.07
G20: set units of measure in inches
DO NOT USE! If the unit is set to inches, the machine will also interpret all offsets in the tables in inches.
G21: set the units of measure to millimeters
At the beginning of each program, it is a good idea to execute command G21 for certainty.
| ---- | ||
