G01 Engl

Kohteesta Helsinki Hacklabin wiki
Versio hetkellä 8. helmikuuta 2021 kello 19.06 – tehnyt Haarald (keskustelu | muokkaukset) (Ak: Uusi sivu: Category: G code '''G01: The function performs a coordinated movement at the machining speed to the given coordinates.''' right Syntax: <br /> <br /> '''...)
(ero) ← Vanhempi versio | Nykyinen versio (ero) | Uudempi versio → (ero)
Loikkaa: valikkoon, hakuun

G01: The function performs a coordinated movement at the machining speed to the given coordinates.

G01 1.PNG

Syntax:

G01 {X | Y | Z} {F}

The movement takes place from the current starting point to the coordinates given in the block. If an axis is not mentioned, its previous value remains valid (no movement takes place with respect to the axis in question. At least one axis must be specified. otherwise be valid, otherwise no movement will take place.



-

Previous

Back to G code list

Next