E0003 Oskilloskooppi

Elektroniikkahuoneen Oskilloskooppi Siglent

Tieto Teksti Hacklab ID E0003 Nimitys Oskilloskooppi Laiteteksti Rigol Digital Storage Oscilloscope Tunnusnumero ??? Hankinta-aika ??? Erityistietoja Kommentti Omistaja Hacklab Yhteyshenkilö Tilavastaava Laitetiedot manuaalista 7.0 inch WVGA (800*480) TFT LCD, with ultra-wide screen, vivid picture, low power consumption and long service life 4 channels, Bandwidth: 100 MHz Single real-time sampling rate 1GSa/s Trigger types: Edge, Pulse, Video,Slope and Alternative Unique Digital Filter function and Waveform recorder function Auto measure thirty two parameters and support all measurement function. Two groups’ reference waveforms and twenty groups’ capture waveforms and twenty groups’ setups internal save/recall function and USB flash drive save/recall function. Cursor types: Manual mode, Track mode and Auto mode. Channel waveform and its FFT waveform display on split screen. Waveform Intensity and Grid Brightness can be adjusted. Menu display in the form of pop-up that in order to convenience users to use it. Rich Screen display styles: Classical, Modern, Tradition, Succinct. Multiple Language User Interface. Support Multilingual online help system Standard interface: USB Host; USB Device; RS-232; Pass/Fail Out Main features: ⚫ 1 GSa/s real-time sample rate of the analog channels; up to 24 Mpts standard memory depth ⚫ 1 GSa/s real-time sample rate of the digital channels ⚫ 100 MHz, 70 MHz and 50 MHz analog channel bandwidth ⚫ 4 analog channels, 16 digital channels (only available for DS1000Z Plus that has been upgraded with the MSO upgrade option) ⚫ Dual-channel 25 MHz signal source (applicable to digital oscilloscopes with source channels) ⚫ 30,000 wfms/s (dots display) waveform capture rate ⚫ Real-time hardware waveform recording and playback functions; up to 60,000 frames of waveform can be recorded ⚫ Intensity graded color display ⚫ Low base noise, 1 mV/div to 10 V/div ultra-wide vertical dynamic range ⚫ Adjustable waveform brightness ⚫ Auto setting of waveform display (AUTO) ⚫ Up to 15 kinds of trigger functions, including various protocol triggers ⚫ Standard parallel decoding and multiple serial decoding ⚫ Auto measurement of 37 waveform parameters (with statistics) ⚫ Fine delayed sweep function ⚫ Built-in FFT function ⚫ Multiple waveform math operation functions ⚫ Pass/fail test function ⚫ Standard interfaces: USB Device, USB Host, LAN and Aux ⚫ Conform to LXI CORE 2011 DEVICE class instrument standards; enable quick, economic and efficient creation and reconfiguration of test system ⚫ Supports remote command control ⚫ Built-in help to facilitate information acquisition ⚫ Supports multiple languages and Chinese/English input ⚫ Novel and delicate industrial design and easy operation Opastusta Youtubessa How NOT To Blow Up Your Oscilloscope! Oscilloscopes Made Easy #1 - Introduction to Oscilloscopes (Rigol DS1104Z) Käyttöohje