Ero sivun ”G06 Engl” versioiden välillä

Helsinki Hacklabin wikistä
Siirry navigaatioon Siirry hakuun
(Ak: Uusi sivu: Category: G code right '''G17: Set circular interpolation plane to XY plane''' <br /> <br /> <br clear=all> ---- {| style = "text-align: center; backg...)
 
 
Rivi 1: Rivi 1:
 
[[Category: G code]]
 
[[Category: G code]]
[[File: G02G03_1.PNG | right]]
+
=G20: set units of measure in inches=
'''G17: Set circular interpolation plane to XY plane''' <br />
+
'''DO NOT USE!''' If the unit is set to inches, the machine will also interpret all offsets in the tables in inches.
 +
 
 +
=G21: set the units of measure to millimeters=
 +
At the beginning of each program, it is a good idea to execute command G21 for certainty.
 +
 
  
<br />
 
<br clear=all>
 
----
 
 
{| style = "text-align: center; background-color: #ffffcc; width: 100%;"
 
{| style = "text-align: center; background-color: #ffffcc; width: 100%;"
| colspan = "3" |
+
| colspan = "3" | ----
 
|-
 
|-
 
| style = "text-align: center; width: 33%; |
 
| style = "text-align: center; width: 33%; |
[[G04 | <big> Previous </big>]]
+
[[G19 | <big> Previous </big>]]
 
| style = "text-align: center; |
 
| style = "text-align: center; |
 
[[G code | <big> Back to G code list </big>]]
 
[[G code | <big> Back to G code list </big>]]
 
| style = "text-align: center; width: 33%; |
 
| style = "text-align: center; width: 33%; |
[[G18 | <big> Next </big>]]
+
[[G28 | <big> Next </big>]]
 
|}
 
|}

Nykyinen versio 12. helmikuuta 2021 kello 21.20

G20: set units of measure in inches

DO NOT USE! If the unit is set to inches, the machine will also interpret all offsets in the tables in inches.

G21: set the units of measure to millimeters

At the beginning of each program, it is a good idea to execute command G21 for certainty.


----

Previous

Back to G code list

Next