Lähdekoodi sivulle POM-stash

== POM-Stash ==

This is not a Hacklab official thing, this is a separate, private setup offered by Tjl. Any comments are welcome on slack or in person.

'''WORK IN PROGRESS. NOT YET IN USE BUT TALK TO TJL ON SLACK IF YOU NEED YOUR FIX'''

There is a pay-as-you-go stash of POM-C at the lab.

Final location TBD.

== Current inventory ==

You can find the current (not updated live!) inventory and prices at the spreadsheet

https://docs.google.com/spreadsheets/d/1mRaH4ZC1FsSRiC2JuGChmDn-CpI5cFmjFaLQRhudz-4/edit?usp=sharing

(note: there is some tolerance in the thicknesses, measure before using if your design is sensitive to thickness)

== Procedure ==

1. Cut your part (either use laser cutter directly or cut with the circular saw or bandsaw)

2. Calculate your area. Use the largest rectangle that contains all your markings. If that would leave less than 5cm of material in some direction, you must pay for that material as well.

3. Use the form to report your usage
https://docs.google.com/forms/d/e/1FAIpQLScrr4w0Cu22V43BUmgu0zslpP6bAlFp11coZ2EJREG9wHoD_A/viewform?usp=sf_link


4. Pay to Tjl (instructions to follow later)